The MiPro 4MR-DANTE is a Dante interface module upgrade designed to transmit audio signals from compatible MiPro wireless receiver systems into Dante network audio for low-latency, high-quality digital distribution. Designed for modern professional audio environments, it enables MiPro ACT-series receivers to integrate seamlessly into networked audio workflows using standard Cat.5e / Cat.6 cabling and Ethernet switching. With support for Dante Controller software, the 4MR-DANTE provides efficient audio routing, monitoring, and scalable multi-device integration for stage, broadcast, and installation applications.
Engineered as a dedicated Dante interface upgrade, the MiPro 4MR-DANTE integrates directly with supported MiPro receiver platforms, expanding system connectivity without adding unnecessary complexity. It uses a standard RJ-45 Ethernet connection to deliver reliable network audio performance over structured cabling infrastructure. By enabling audio distribution over standard Ethernet switches and DHCP-enabled networks, it promotes clean system design and simplified installations while maintaining broadcast-grade reliability and audio integrity.
| Specification | Details |
|---|---|
| Product Brand | MiPro |
| Model | 4MR-DANTE |
| Product Type | Dante Interface Module |
| Supported Receivers | ACT-800 Series, ACT-700 Series, ACT-500 Series |
| Interface | RJ-45 Ethernet (Cat.5e / Cat.6) |
| Network Requirements | Standard Ethernet switch with DHCP, or an external DHCP server / WiFi router |
| Control Software | Dante Controller (refer to the Audinate official website) |
The MiPro 4MR-DANTE simplifies the transition from traditional receiver outputs to modern networked audio systems by enabling Dante connectivity directly from compatible MiPro wireless receivers. This allows audio professionals to distribute multiple channels across a standard Ethernet network, reduce cabling complexity, and scale systems for large installations or multi-room deployments. With low-latency digital performance and Dante Controller compatibility, it delivers an efficient workflow for live production, corporate AV, education, and fixed venue installations where reliable routing is essential.
Q: What does the MiPro 4MR-DANTE module do?
A: It transmits audio signals from compatible MiPro wireless receivers into Dante network audio for digital distribution over Ethernet.
Q: Which receivers are compatible with the 4MR-DANTE upgrade?
A: It supports MiPro ACT-800 Series, ACT-700 Series, and ACT-500 Series receivers, including ACT-828 and ACT-848 models.
Q: What type of network connection does it use?
A: It uses an RJ-45 Ethernet connection and works with Cat.5e or Cat.6 network cables.
Q: Do I need special network hardware to run Dante?
A: It operates with a standard Ethernet switch with DHCP, or you can use an external DHCP server or WiFi router depending on your network setup.
Q: Can I control routing and monitoring through software?
A: Yes, the module is compatible with Dante Controller software for routing, monitoring, and network audio management.
