MiPro TA-58 Digital Plug-On Transmitter & Reciever Kit

MiPro kit for making an exsisting microphone wireless.

Package Includes:

• 1 x TA-58 ISM Digital Plug-on Transmitter
• 1 x ACT-5801 ISM 5 GHz 1U Single-Channel Digital Receiver

Features:

TA-58

• Operates in the ISM band to avoid the wireless interference signals.
• The TA-58 features a flat and wide frequency response, ultra-low T.H.D. and noise floor, and fast transient response. It solves the problems of tangling microphone cables and defects of analog transmission. Thus, it is an ideal plug-on transmitter to reproduce the natural sound of any premium wired microphone.
• A balanced XLR input jack for any condenser microphone to plug on. It provides supplies 48V, up to 10 mA phantom power for condenser microphone, and can be switched off for the dynamic microphones.
• A built-in high-capacity lithium-ion battery enables up to 8 hours of use per charge. The TA-58 can be recharged via a USB Type-C socket. It is fast and easy to replace the battery with a foolproof design.
• The fiber reinforced plastic housing has a built-in high efficiency transmitting antenna and a green backlit LCD displaying operation parameters.

ACT-5801 Single Channel

• Single-Channel in 1U metal chassis with antenna connectors on the rear panel for connecting the external antenna system.
• MIPRO’s unique control panel equips a graphic OLED, providing a larger field of view without a blind angle.
• Stable digital modulation circuitry. All frequencies are located in a single frequency band.
• Dual tuner true diversity receiving ensures long reception distance and eliminates signal drop-out.
• Effectively avoids the RF interference from UHF, Bluetooth, Wi-Fi and all 2.4 GHz communication products.
• Presets Group A and B. Group A has less interference. Group B is recommended when more channels or shorter latency is required. Group A and B can’t operate at the same time.

Specification:

TA-58

• Model - TA-58
• Name - ISM Digital Wireless Plug-on Transmitter
• Carrier-Frequency Range - ISM 5.8 GHz (5,725~5,850 MHz)
• Bandwidth - 125 MHz
• RF Output Power - 20 mW (country dependent)
• Gain Setting - 0 dB
• AF Input Level - 2V max.
• Phantom Power - 48 V at 10 mA max.
• Battery Type - ICR 18500 lithium-ion battery
• Charger - USB Type-C

ACT-5801 Single Channel

• Model - ACT-5801
• Name - ISM 5 GHz 1/2U Single-Channel Digital Receiver
• Channel - Single
• Chassis - EIA Standard 1/2U metal case
• Antenna - Built-in, front panel
• Display - Graphic OLED
• Frequency Range - ISM 5.8 GHz (5,725~5,850 MHz)
• Preset Channels - Presets 12 channels of interference-free operation in Group A and 24 channels of interference-free operation in Group B1 & B2. 64 ID codes and 1 specific ID are allowed to be set for each channel to prevent the same channel interfered on the same occasion.
• Receiving Mode - Dual-tuner true diversity receiving. MIPRO’s ACT Sync channel set-up.
• Sample Rate - 24-bit / 48 kHz
• Frequency Response - 18 Hz ~ 23 kHz
• Latency - < 1.5 ms (Group B)
• Dynamic Range - > 120 dBA
• Output Connectors - Balanced XLR & Unbalanced Ø 6.3 mm, -10 ~ +20 dB adjustable range.
• Power Supply - External 100~240V AC switching power supply