Audac COM12 100V 5 Zone PA Amplifier 120W

The Audac COM12 100V 5 Zone PA Amplifier is a public address amplifier, with a power up to 120 W.

It contains a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Line and Microphone level, 2 balanced inputs which are switchable between Line and Microphone level, and two balanced inputs which are selectable between Line and Microphone level with priority settings and phantom power.

The output signal is available on 5 high impedance 100V mono output zones or one low impedance 4 Ohm mono output zone.

Other present features are a link in- and output, an amp input and pre-amp output, an integrated chime module, a remote microphone input and the possibility to connect a telephone pager unit.

It is equipped with an advanced protection circuit, which protects against DC short circuit, overheat, overload and limits the signal when necessary.

All control functions such as channel selection and volume controls, a 2 band tone control, the master volume control and indicators like a VU LED bar and clipping LED’s are located at the front of the amplifier.

Features:

• +15V Phantom power
• 2 Band tone control
• 2 Mono balanced Line / Mic level inputs
• 2 Mono balanced Line / Mic level inputs with priority and phantom power
• 2 Stereo unbalanced line level inputs
• 4 Ohm low impedance output
• 5 x 100V mono output zones
• Telephone pager connection
• Up to 6 microphones

Technical specifications:

• Dimensions (W x H x D) 420 x 86 x 320 mm
• Signal / Noise > 90 dB
• Frequency Response 20Hz - 20kHz
• THD + N < 0,5%
• Output voltage / Impedance 100V / 4 Ohm
• Weight 9.7 Kg
• Power Supply 240V AC / 50-60Hz
• RMS power 120 Watt