PA-1960 High Power 100V PA Amplifier 960W

The PA-1960 High Power 100V PA Amplifier 960W has a unique feature to take a slave input direct from a 100V source. The amplifier can also be used as 50V, 60V, 75V and 85V configurations and features 2 insertion facilities at the rear side for optional modules: fault detection and fault monitoring.

Features:

• Additional, adjustable priority input with switchable priority function
• 100 V slave input for inserting the amplifier into a 100 V speaker line
• Switchable 400 Hz high-pass filter 6 dB/oct.
• 2 insertion facilities at the rear side for optional modules with the following features:
• PA-6FD: fault detection module
• PA-6FM: fault monitoring module
• Connection for external on/off switch (remote start)
• Temperature-controlled fan, continuously adjustable
• LED display for fault, protect, clip, signal, priority
• Mains operation or 24 V emergency power operation

Technical specification:

• Output power 1 x 960 WRMS
• Input sensitivity 0.775 V/60 kΩ, bal.
• Output impedance 75 V/5.6 Ω, 85 V/7.2 Ω, 100 V/10 Ω
• Frequency range 35-20,000 Hz
• S/N ratio > 100 dB, A-weighted
• THD < 0.4 %
• High-pass filter 400 Hz, 6 dB/oct.
• Admiss. ambient temp. 0-40 °C
• Power supply 230 V˜/50 Hz/2,600 VA,
• 24 V DC current /80 A
• Dimensions 483x133x374 mm, 3 RS
• Weight 25 kg
• Connections:
• Signal input screw terminals
• Speaker output screw terminals